The <
> dial is used for AF point selection and selecting the desired setting on the LCD monitor. This <> dial works only when the <
> switch is set to <ON>.
There are three ways to use the <> dial:
 |
While pressing a button, turn the <> dial.
- In this way, you can select and set various menu settings or set flash exposure compensation. When you let go of the button, the selected setting takes effect.
- You can also review and select images on the LCD monitor with this dial.
|
 |
After pressing a button, turn the <> dial.
When you press a button, its function remains on for 6 seconds ( ). During this time, you can turn the <> dial to the desired setting.
After the button turns off or if you press the shutter button halfway, the camera will be ready to shoot.
- In this way, you can select the AF point or set the desired amount of exposure compensation.
|
 |
Turn the <> dial only.
While turning the <> dial, look at the setting in the viewfinder or on the top LCD panel.
- In this way, you can set the aperture in the camera' s manual exposure mode.
|
