Opening and closing the memory card/battery cover (PowerShot D30)
Article ID: ART115162 |
| |
Date published: 05/11/2015 |
| |
Date last updated: 11/16/2015 |
Description
Opening and closing the memory card/battery cover (PowerShot D30)
Solution
Opening and closing the memory card/battery cover (PowerShot D30) ID
:
8202038500
_
EN
_
1
|
Solution |
The following explains the procedure for opening and closing the memory card/battery cover.
The insertion methods for the battery and memory card are included.
1. Open the cover.
Slide the lock ( ) and open the cover ( ).
2. Insert the battery pack.
- While pressing the battery lock in the direction of the arrow, insert the battery pack as shown and push it in until it clicks into the locked position.
- If you insert the battery facing the wrong way, it cannot be locked into the correct position. Always confirm that the battery is facing the right way and locks when inserted.
- Be careful not to damage the waterproof seal when inserting the battery pack.
3. Insert the memory card.
- Recording is not possible on memory cards with a write-protect tab when the tab is in the locked position. Slide the tab to the unlocked position.
- Insert the memory card facing as shown until it clicks into the locked position.
- Make sure the memory card is facing the right way when you insert it. Inserting memory cards facing the wrong way may damage the camera.
- Be careful not to damage the waterproof seal when inserting the memory card.
4. Close the cover.
- Lower the cover in the direction of the arrow and press it until it clicks into the closed position.
- Make sure the lock returns to the position shown, with the red mark no longer visible.
This completes the steps for opening and closing the memory card/battery cover.
|