Ask a Question

Adjusting the Scanner is displayed while scanning - MB5320

Article ID: ART117175 | Date published: 05/12/2015 | Date last updated: 04/25/2019
 

Description

Adjusting the Scanner is displayed while scanning - MB5320

Solution

If the scanning operation slows down or stops temporarily and the message "Adjusting the scanner ..." is displayed on the LCD or computer try one or more of the following:

 

  1. Keep scanning as is.  The scanning operation will complete, however, there may be some additional pausing during scanning.
     
  2. Stop the scanning operation, then wait 10 minutes or longer and try again.
     
  3. Decrease the scanning resolution. See Scan settings for information.
     
  4. Change the scanning mode from Color to Black & White (Press the Black button to start scanning).

MB5320 Page


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments