If your MAXIFY printer is not detected by any wireless devices after it has been connected to a wireless LAN, disabling IPv6 on the printer may correct the issue. Follow the steps below to disable IPv6.
- Make sure the printer is turned on.
- Press the HOME button then select Setup.
- Select Device settings.
- Select LAN settings.
- Select Other settings.
- Select TCP/IP settings.
- Select IPv6.
- Select Yes.
- Select Enable/Disable IPv6.
- Select Disable.
In addition to this, disabling
Wireless LAN DRX may help reduce the possibility of communication issues. After following steps 1 - 10 above, press the
BACK 
button twice. Then:
- Scroll down and select Wireless LAN DRX setting.
- Select Disable.
- Press the HOME button.
