If You Cannot Send a Fax ID:
8202174700_
EN_
1
|
Issue |
You cannot send a fax. An error message appears on the display when you send faxes.
|
Cause |
If you cannot send faxes, check the following.
|
Summary |
|
See Also |
|
Cause |
Did You Just Turn ON the Main Power Switch?
|
Summary |
Wait for a while. After turning ON the main power switch, the machine cannot scan documents immediately.
|
See Also |
|
Cause |
Is the Machine Set for the Ccorrect Telephone Line Type?
|
Summary |
Make sure the machine is set for the correct telephone line type. If you do not know the telephone line type, contact your local telephone company.
|
See Also |
|
Cause |
Is Your Machine in the Fax Mode?
|
Summary |
Tap <Fax> to show the fax standby display.
|
See Also |
|
Cause |
Is the Document Loaded Correctly?
|
Summary |
|
See Also |
|
Cause |
|
Summary |
2. Make sure the feeder and rear cover are fully closed.
|
See Also |
|
Cause |
Is the Specified Destination Registered Correctly?
|
Summary |
|
See Also |
|
Cause |
Did You Dial the Correct Number?
|
Summary |
Check that you have the correct number.
|
See Also |
|
Cause |
Is the Machine in the Sleep Mode?
|
Summary |
The machine does not scan originals if it is in the Sleep mode. To take the machine out of the Sleep mode, press on the operation panel.
|
See Also |
|
Cause |
Is the Recipient's Machine Out of Paper?
|
Summary |
Ask the recipient to make sure paper is loaded in the machine.
|
See Also |
|
Cause |
Are there other Documents being Sent from Memory?
|
Summary |
Allow time for the documents to finish sending.
|
See Also |
|
Cause |
Has an Error Occurred During Transmission?
|
Summary |
|
See Also |
|
Cause |
Is the Telephone Cable Connected Properly?
|
Summary |
|
See Also |
|
Cause |
Is the Telephone Line Working Properly?
|
Summary |
Make sure there is a dial tone when you press [Hook] or when you lift the handset of any external telephone connected to the machine. If there is no dial tone, contact your local telephone company.
|
See Also |
|
Cause |
Is the Recipient's Machine a G3 Fax Machine?
|
Summary |
Make sure the recipient's machine is compatible with your machine.
|
See Also |
|
Cause |
Is an Error Code #018 Shown on the TX ERROR REPORT?
|
Summary |
The fax number you dialed is busy. Try sending the document later.
|
See Also |
|
Cause |
Did the Recipient's Machine Answer within 35 Seconds (After All Automatic Redialing Attempts)?
|
Summary |
Ask the recipient to check the fax machine. When sending the fax overseas, insert pauses in the fax number.
|
See Also |
|
Cause |
Is the [Processing/Data] Indicator Blinking?
|
Summary |
The external phone is busy. Please wait until the external phone becomes free.
|
See Also |
|
Cause |
Is the Machine Overheated?
|
Summary |
Unplug the machine and let it cool for about 5 minutes. Then plug in the machine and try sending again.
|
See Also |
|
Cause |
Is a Fax Sent Using an Optical Fiber Line?
|
Summary |
When using an optical fiber line or IP phone line, the machine may not work correctly depending on the connection environment or connected devices. In such a case, contact the provider of the optical phone line or IP phone.
|
See Also |
|