➤
Home
Articles
FAQs
Ask a Question
Search
Models related to this article
Color imageCLASS MF624Cw
Color imageCLASS MF628Cw
Color imageCLASS MF726Cdw
Color imageCLASS MF729Cdw
Home
Articles
Products
Printers
Color Laser
Color imageCLASS MF624Cw
Articles Detail
Adjusting the Volume
Article ID: ART163084
|
Date published: 10/15/2015
|
Date last updated: 10/15/2015
Description
Adjusting the Volume
Solution
Solution
The machine produces sounds in a variety of situations, such as when fax sending is complete or when a paper jam or error occurs. You can set the volume of each of these sounds individually.
Adjusting <Fax Volume> (MF729Cdw / MF726Cdw / MF628Cw)
1. Press the
(
) key.
2. To change <Fax Volume>, tap
/
, and tap <Apply>.
You can also adjust the volume by flicking the slider.
Tap
and move the cursor all the way to the left to mute the sound.
Adjusting <Other Volume>
1. Press
(
) key.
For MF729Cdw / MF726Cdw / MF628Cw, tap <Other Volume>.
2. Select a setting.
Setting
Description
Procedure
<Ring Tone>*
Sound produced when an incoming fax is received
Go to step 3.
<TX Done Tone>*
Sound produced when fax sending is complete
<RX Done Tone>*
Sound produced when fax receiving is complete
<Scanning Done Tone>*
Sound produced when fax document scanning is complete
<Entry Tone>
Confirmation sound each time a key on the operation panel or button on the display is pressed
Select <On> (produce a tone) or <Off> (not produce a tone).
<Invalid Entry Tone>
Sound produced when an invalid key operation is performed, such as when you enter a number outside the valid setting range
<Restock Supplies Tone>
Sound produced when a toner cartridge is almost empty
<Warning Tone>
Sound produced when a paper jam or other error occurs
<Job Done Tone>
Sound produced when an operation such as copying or scanning is complete
<Energy Saver Alert>
Sound produced when the machine enters or exits sleep mode
<Original in Feeder Detection Tone>
Sound produced when an original is loaded in the feeder
* Displayed only for MF729Cdw / MF726Cdw / MF628Cw
3. Use
/
to set volume, tap <Apply>.
Tap
and move the cursor all the way to the left to mute the sound.
End sound only for error
Tap <Only When Err.>
<On>
<Apply>.
ID: 8202636500_EN_1
SIMS Doc Id
8202636500
Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments
Rate Article