In [ ] mode, you can Set your preferred shutter speed before shooting. The camera automatically adjusts the aperture value to suit your shutter speed. In [ ] mode, you can set your preferred aperture value before shooting. In this case the camera automatically adjusts the shutter speed to suit your aperture value. In [ ] mode, you can set your preferred shutter speed and aperture value to obtain the desired exposure.

: Blurred motion (Slow shutter speed)

: Frozen action (Fast shutter speed)

: Blurred background (With a low aperture f/number)

: Sharp foreground and background (With a high aperture f/number)

Setting the Shutter Speed ([Tv] Mode)

2. Set the mode dial to [ ].

3. Turn the [ ] dial to set the shutter speed.

: Shutter Speed

IMPORTANT

• In conditions requiring slower shutter speeds, there may be a delay before you can shoot again, as the camera processes images to reduce noise.
• When shooting at low shutter speeds on a tripod, you should set [IS Mode] to [Off].
• The speed you set may be lowered automatically as needed if the flash fires.
• Orange display of the aperture value when you press the shutter button halfway indicates that the optimum exposure has not been obtained. Adjust the shutter speed until the aperture value is displayed in white, or use safety shift.

NOTE

• [ ]: Time value

Setting the Aperture Value ([Av] Mode)

2. Set the mode dial to [ ].

3. Turn the [ ] dial to set the aperture value.

: Aperture Value

IMPORTANT

• Orange display of the shutter speed when you press the shutter button halfway indicates that the optimum exposure has not been obtained. Adjust the aperture value until the shutter speed is displayed in white, or use safety shift (see below).

NOTE

• [ ]: Aperture value (size of the opening made by the diaphragm in the lens)
• In [ ] and [ ] modes, press the [MENU] button and set [Safety Shift] on the [ 6] tab to [On] to have the camera automatically adjust the shutter speed and aperture value when there are exposure problems, so that you can shoot at the optimum exposure.

However, safety shift is disabled when the flash fires.

Setting the Shutter Speed and Aperture Value ([M] Mode)

2. Set the mode dial to [ ].

- When the ISO speed is fixed, an exposure level mark () based on your specified value is shown on the exposure level indicator for comparison to the standard exposure level (). The exposure level mark is shown as [ ] or [ ] when the difference from standard exposure exceeds 3 stops.

REFERENCE

The ISO speed is determined and screen brightness changes when you press the shutter button halfway after setting the ISO speed to [AUTO]. If standard exposure cannot be obtained with your specified shutter speed and aperture value, the ISO speed is displayed in orange.

IMPORTANT

• After you set the shutter speed or aperture value, the exposure level may change if you adjust the zoom or recompose the shot.
• Screen brightness may change depending on your specified shutter speed or aperture value. However, screen brightness remains the same when the flash is up and the mode is set to [ ].
• Images shot at high ISO speeds may look grainy.

NOTE

• [ ]: Manual
• Calculation of standard exposure is based on the specified metering method.
• The following operations are available when ISO speed is set to [AUTO].

- Adjust exposure by turning the exposure compensation dial.

- Press the [ ] button to lock the ISO speed. Screen brightness changes accordingly.