Press the power switch <ON>. "1" appears in the Copy quantity (/Copy ratio) display.
Place your original on the platen glass. The side that you want to copy must face downward. Align the original between the appropriate paper size marks. After placing the original, lower the platen glass cover. Do not copy with the platen glass cover left open; doing so will result in excessive toner consumption.
Close the platen glass cover gently to avoid catching your hand, as this may result in personal injury.
Press the <Start> button.
Do not turn the main power OFF during copying. Doing so will cause a paper jam.
When you finish copying, press the power switch [OFF].
If the copier will not be used for an even longer period of time such as during consecutive holidays, unplug the power for safety.
Use the guide plate on the left side of the platen glass to position originals.
-
If your original conforms to a standard paper size (e.g., LTR or STMT), align the original between the appropriate paper size marks on the guide plate.
-
If you do not know the size of your original, or if your original does not match any of the paper size marks, align the center of your original with the "arrow" mark at the center of the guide plate.
The illustration below shows how to place an LTR-size original.