How to use the One-touch RAW+JPEG function on the EOS 7D.
Article ID: ART131501
|
Date published: 05/12/2015
|
Date last updated: 11/04/2015
Description
How to use the One-touch RAW+JPEG function on the EOS 7D.
Solution
If the current recording quality is JPEG only, you can press the <> button to also capture a RAW image ( by default) at the same time. If the current recording quality is RAW only, press the button to also capture a JPEG image ( by default).
This button will not work if the camera is already set to capture RAW and JPEG images at the same time.
1. Select [One-touch RAW+JPEG].
Under the [] tab, select [One-touch RAW+JPEG], then press <>.
2. Select RAW or JPEG.
Turn the <> dial and select RAW or JPEG, then press <>.
3. Select the image-recording quality.
Turn the <> dial to select the image recording quality, then press <>.
4. Take the picture.
Press the <> button.
The image-recording quality will blink on the LCD panel. To cancel the setting, press the <> button again.
Press the shutter button completely to take the picture.
After the picture is taken, the setting will be canceled.