Setting Enlarging/Reducing

You can enlarge or reduce the copy size using preset copy ratios or using custom copy ratios.

Preset Copy Ratios
Custom Copy Ratios

1. Press <Copy>.
   If you are already in the Copy standby mode, you can skip this step.
   
   
   
2. Press <Enlarge/Reduce>.
   
   
   
   
3. Press <> or <> to select the copy ratio, then press <Set>.
   
   
   
   You can select from the following:
   

   -	200% MAX.
   -	129%
   -	100%
   -	78% LGL->LTR
   -	64%
   -	50% MIN.

   
   
   
   • If the [PAPER SIZE GROUP] setting of [COPY SETTINGS] menu in the Menu is set to 'INCH' or "AB', the preset copy ratios will be as follows:
     INCH: 50%, 64%, 78%, 100%, 129% and 200%
     A: 50%, 70%, 100%, 141% and 200%
     AB: 50%, 70%, 81%, 86%, 100% 115%, 141% and 200%
     "INCH" is set as the factory default.
   • To reset the copy ratio, press <Enlarge/Reduce> several times to display [DIRECT 100%] ratio, then press <Set>.

1. Press <Copy>.
   If you are already in the Copy standby mode, you can skip this step.
   
   
   
2. Press <Enlarge/Reduce> twice.
   
   
   
   
   • You can enter the copy ratio from 50% to 200%, selectable in 1% increments.
   • Even after entering the copy ratio, you can use <> or <> to adjust the copy ratio. To increase the copy ratio, press <>. To decrease the copy ratio, press <>.
   
   
   To reset the copy ratio, press <Enlarge/Reduce> several times to display [DIRECT 100%] ratio, then press <Set>.