Reserve Copy
This feature allows you to reserve the next job while the machine is printing out a current job.
- Load the document faced down to be reserved in the ADF.
- Use the numeric buttons to enter the number of copies.
You can set up to 99 copies.
-
Adjust any necessary settings for your document.
- Press <Image Quality> to select the scanning resolution.
- Press <Exposure> to select the scanning exposure.
- Press <Enlarge/Reduce> to select the copy ratio.
-
Press <Start>.
The machine begins scanning.
- After printing of the current copy job is complete, the next copy begins.
- If the memory becomes full while scanning, [MEMORY FULL] appears in the LCD. When the ADF is used for scanning, the document being scanned stops in the ADF. In this case, press <Set> to make the document come out automatically. All of the scanned documents will be erased if [MEMORY FULL] appears, so divide the document and copy each part separately or select a lower image quality mode and make copies again.
- If the available memory decreases, [PLEASE WAIT], and [MAKING SPACE IN MEM] are displayed alternatively. If memory space becomes available, the scanning begins again automatically. Also, check that the cassette is not empty.
Confirming the Copy Job You Reserved
- Press <Stop/Reset> while the machine is printing out.
-
Press <> or <> to confirm the reservation number and number of documents.
To finish confirming, press <Stop/Reset>.
Deleting the Copy Job You Reserved
- Press <Stop/Reset> while the machine is printing out.
- Press <> or <> to display the job to be deleted, then press <Set>.
-
Press <> for [YES].
The reserved copy job is deleted.
- To cancel deleting the copy job, press <> for [NO].
- Once the copy job is deleted, the job cannot be restored.