Cleaning the Fixing Roller
If the printed paper has smudge marks, clean the fixing roller using the following procedure.
* Letter size plain paper is required to clean the fixing roller. Have Letter size plain paper ready.
1. Load Letter size plain paper in the multi-purpose tray.
For details on the procedures for loading paper, see the "e-Manual" (HTML manual) in the CD-ROM supplied with the printer.
2. Make sure that the printer is online.
If the printer is not online, press [ 
] (Online).
3. Press [ 
] (Utility).
4. Select [Cleaning] using [ 
] and [ 
], and then press [OK].
5. Select the size of the paper loaded in the multi-purpose tray using [ ] and [ ], and then press [OK].
6. Select [Yes] using [ ], and then press [OK].
<Set cleaning paper and press the Online key.> is displayed on the display.
7. Press [ ] (Online).
The paper is fed in the printer, and the printer starts cleaning the fixing roller.
The cleaning is finished when the paper is output completely.
* Cleaning the fixing roller cannot be canceled. Please wait until it is completed.
important:
Do not touch the paper until it is output completely while cleaning the fixing roller.
- The paper is once output partially after the front side is printed, and then it is fed again to clean the fixing roller.
important:
Cleaning time
- It takes approximately 114 seconds.
