How to change the Metering Mode on the EOS M50 Mark II.
Article ID: ART178452 |
| |
Date published: 11/19/2020 |
| |
Date last updated: 11/30/2020 |
Description
Canon : Product Manual : EOS M50 Mark II : Metering Mode
Solution
Metering Mode
Four methods (metering modes) to measure the subject’s brightness are provided. Normally, evaluative metering is recommended. Evaluative metering is set automatically in Basic Zone modes (except in : mode, which uses center-weighted average metering).
-
Select [: Metering mode].
-
Select an option.
-
: Evaluative metering
General-purpose metering mode suited even for backlit subjects. The camera adjusts the exposure automatically to suit the scene.
-
: Partial metering
Effective where there are much brighter lights around the subject due to backlight, etc. Covers approx. 5.8% of the area at the center of the screen. The partial metering area is indicated on the screen.
-
: Spot metering
Effective when metering a specific part of the subject. Covers approx. 2.9% of the area at the center of the screen. The spot metering area is indicated on the screen.
-
: Center-weighted average
The metering across the screen is averaged, with the center of the screen weighted more heavily.
|
SIMS Doc Id
1605640552114086917