Loading and Printing on Sheets in the Paper Feed Slot Manual feed from the top (iPF610)
Article ID: ART119059
|
Date published: 05/12/2015
|
Date last updated: 08/17/2015
Solution
Loading and Printing on Sheets in the Paper Feed Slot Manual feed from the top (iPF610)
These are the basic steps for loading sheets in the paper feed slot and then printing from this slot. Follow the steps below to load and print on sheets in the paper feed slot.
<Note>
If a Roll is loaded, rewind the Roll before this procedure.
You can load only one sheet in the Top Paper Feed Slot . Do not load more than one sheet at a time. This may cause paper jams.
Turn the printer on.
Complete settings in the printer driver for the type and size of paper and other details.
Send the print job.
Open the Paper Tray Cover (a), and then open the Tray Extension (b).
Slide the Width Guide (a) to align it with the mark for the size of paper you will load.
Load the paper in the Tray with the printing side face-up. Insert the paper until its edge touches the far end of the tray lightly.
Move the Width Guide (a) to match the size of paper loaded. Set the Width Guide against the edge of the paper to prevent the paper from becoming crooked or wrinkled.