The back side of the paper is dirty (iPF9400) (iPF9400S)
Article ID: ART136518 |
| |
Date published: 05/13/2015 |
| |
Date last updated: 12/22/2015 |
Description
The back side of the paper is dirty (iPF9400) (iPF9400S)
Solution
The back side of the paper is dirty (iPF9400) (iPF9400S)
ID : 8201674900 _ EN _ 1
|
Solution |
Cause |
Corrective Action |
The Platen has become dirty after borderless printing or printing on small paper. |
Open the Top Cover and clean the Platen. |
In the Control Panel menu, set CarriageScanWdth to Fixed. |
The Platen has become soiled because you have set Width Detection to Off in the Control Panel menu. |
Set Width Detection to On in the Control Panel menu, and then open the Top Cover and clean the Platen. |
Open the Top Cover and clean the Platen. After this, manually advance the roll onto the Platen before printing. |
The Platen suction is too strong. |
In the Control Panel menu, reduce the level of VacuumStrngth.
(See " Adjusting the Vacuum Strength (VacuumStrngth) (iPF9400) (iPF9400S) .") |
"BordlessOversize" is set to Standard in the Control Panel menu. |
Set "BordlessOversize" to "Little" in the Control Panel menu. |
|