Copying an ID Card
You can make a copy of a 2-sided card onto one side of a paper.
1. Place a card on the platen glass, and then close the feeder.
Place the card with a 1/4" (5 mm) space created from the left edge of the platen glass.
Additionally, align the center of the card with the arrow mark.
If you want to arrange the cards horizontally
|
|
If you want to arrange the cards vertically
|
|
2. Press [].
3. Press [ ] or [ ] to select <N on 1>, and then press [OK].
4. Press [ ] or [ ] to select <ID Card Copy>, and then press [OK].
5. Press [ ] (Start).
After scanning the document completely, proceed to the next step.
6. Turn and place the card.
Place the card with a 1/4" (5 mm) space created from the left edge of the platen glass.
Additionally, align the center of the card with the arrow mark.
If you want to arrange the cards horizontally
|
|
If you want to arrange the cards vertically
|
|
7. Press [ ] (Start).
Precautions When Copying an ID Card
NOTE:
Placing a document (card)
Place a card on the left half of the platen glass.
Copy ratio
The copy ratio will automatically be set to <100%>.
Usable paper size
A size larger than A4 or Letter
Unavailable functions in combination
You cannot use an ID card copy together with the following functions.
- 2 on 1/4 on 1
- Collating
- 2-Sided
- Copy ratio