➤
Home
Articles
FAQs
Ask a Question
Search
Models related to this article
imageFORMULA DR-M140
Home
Articles
Articles Detail
Replacing the Feed Roller.(DR-M140)
Article ID: ART111951
|
Date published: 05/11/2015
|
Date last updated: 12/22/2015
Description
Use the following procedure to remove/replace the feed roller.
Solution
Use the following procedure to remove/replace the feed roller.
Open the document feed tray.
Raise the OPEN lever, and open the upper unit.
Lower the securing lever for the feed roller forward.
Slide the securing lever for the feed roller to the left.
Remove the feed roller, detaching the left side first.
Install the (new) feed roller, attaching the right side first.
Slide the securing lever for the feed roller to the right.
Slide the securing lever for the feed roller to the right.
Lower the securing lever for the feed roller until it clicks into place.
Close the upper unit by gently pushing down on the left and right sides. Push until it clicks into place to make sure that it is completely closed.
Close the document feed tray.
SIMS Doc Id
0
Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments
Rate Article