Viewing Images on a TV Set
A video-compatible television connected via the supplied AV cable STV-250N can be used to view images as you shoot or replay them.
1. Turn off the camera and the TV.
2. Attach the AV Cable to the A/V OUT terminal on the camera.
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/PowerShot S5IS/S5ISTVConntect.gif)
3. Plug the other ends of the Stereo/Video cable to the video in and audio in jacks on the TV.
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/PowerShot_S2_IS/TV_Connect_2.gif)
4. Turn on the TV and switch it to Video mode.
5. Turn on the camera in Shooting mode or Replaying mode.
- The image will appear on the TV. Shoot or replay images as usual.
- If the images are not appearing on the TV when shooting, press the <DISP.> button.
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/PowerShot_A60_A70/note_icon_A70.gif)
- No image will appear on the LCD monitor when the camera is connected to a TV monitor.
-
The video output signal can be switched (NTSC or PAL) to accommodate different regional standards. The default setting will vary between regions:
- NTSC: Japan, U.S.A., Canada, Taiwan, etc.
- PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
- If an incorrect video system is set, the output image will not display properly.
- If the TV is a stereo model, you can plug the audio plug into either the left or right Audio In jack. Please refer to the TV s manual for details.
- A TV set cannot be used in
mode.