550EX Speedlite : How to set and use the Wide Panel on the flash.
Article ID: ART123920 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 08/17/2015 |
Description
How to set and use the Wide Panel on the flash.
Solution
|
Pull out the wide panel and place it over the flash head as shown. The flash coverage will then be extended to 17mm.
- The button will not work
- Use the wide panel with the flash head at the normal or 7° downward tilt position
|
- If you use bounce flash with the wide panel in place, the entire display on the LCD panel will blink as a warning. Since the subject will be illuminated by the bounce flash and direct flash, it will look unnatural.
- Pull out the wide panel gently. Using excessive force may detach the wide panel.
|
If the wide panel comes off, the <ZOOM> button will not work. If this happens, follow the procedure below.
- Use you finger to push in the panel as shown by the arrow.
- The <ZOOM> button will work again, but the entire LCD panel display bill keep blinking. Take the Speedlite to the nearest Canon Service Center for repair.
|