Main components - MX860
Article ID: ART129137 | | | Date published: 05/12/2015 | | | Date last updated: 05/06/2019 |
Description
Solution
MX860 Main Components
Front View
(1) ADF (Auto Document Feeder)
Load a document to copy, scan, or fax. The document loaded in the Document Tray are scanned automatically one sheet at a time.
(2) Document Feeder Cover
Open when clearing jammed documents.
(3) Document Guides
Adjust these guides to match the width of document in the ADF.
(4) Paper Support
Raise and tip back to load paper in the Rear Tray.
(5) Rear Tray
Load various sizes or types of paper which you can use on the machine. Two or more sheets of the same size and type of paper can be loaded at the same time, and fed automatically one sheet at a time.
(6) Paper Guides
Slide to align with sides of the paper stack.
(7) Document Cover
Open to load an original on the Platen Glass.
(8) Document Tray
Open to load a document in the ADF. You can load two or more sheets of document of the same size and thickness. Load the document with the side you want to scan facing up.
(9) Document Output Slot
Documents scanned from the Document Tray are delivered here.
(10) Card Slot Cover
Open to insert a memory card.
(11) Paper Output Tray
Opens automatically when printing or copying starts and printed papers are ejected.
(12) Output Tray Extension
Open to support the printouts. Open it when printing or copying.
(13) Operation Panel
Use to change the settings of the machine or to operate it.
See Operation Panel.
(14) Scanning Unit Detection Button
Locks the Scanning Unit (Cover) while the Document Cover is open. This button is pressed down when the Document Cover is closed, so that you can open the Scanning Unit (Cover). (You do not need to touch this button.)
(15) Cassette
Load A4, B5, A5, or Letter-sized plain paper and insert it into the machine. Two or more sheets of the same size of paper can be loaded at the same time, and fed automatically one sheet at a time.
(16) Direct Print Port
Connect a PictBridge compliant device such as a digital camera or the optional Bluetooth Unit BU-30* to print directly.
You can also insert a USB flash drive to this port to save scanned data on it.
Refer to the on-screen manual: Advanced Guide
* The Bluetooth Unit is not available in some countries or regions depending on the local laws and regulations.
Warning
Do not connect any equipment other than PictBridge compliant devices, the optional Bluetooth Unit BU-30, and USB flash drives to the Direct Print Port of the machine. This may cause fire, electric shock, or damage to the machine. |
Important
Do not touch the metal casing. |
(17) Platen Glass
Load an original to copy, scan, or fax.
Rear View
(18) Wired LAN Connector
Plug in the LAN cable to connect the machine to a LAN.
Important
Do not touch the metal casing. |
(19) USB Port
Plug in the USB cable to connect the machine with a computer.
Important
Do not touch the metal casing. Do not plug in or unplug the USB cable while the machine is printing from or scanning originals to the computer. |
(20) External Device Jack
Connects an external device such as telephone, answering machine, or modem.
Important
Do not touch the metal casing. |
Note
Remove the Telephone connector cap to connect the external device. |
(21) Telephone Line Jack
Connects with the telephone line.
Caution
To avoid an electric shock, do not touch the metal casing. |
(22) Rear Cover
Detach to remove jammed paper.
(23) Power Cord Connector
Plug in the supplied power cord.
Inside View
(24) Ink lamp
Lights or flashes red to indicate the ink tank status.
(25) Print Head Lock Lever
Locks the Print Head into place.
Important
Do not raise this lever after installing the Print Head. |
(26) Print Head Holder
Install the Print Head.
(27) Scanning Unit (Cover)
Scans the original. Open it to replace ink tanks, to check ink lamps, or to remove jammed paper inside the machine. To open the Scanning Unit (Cover), lift it with the Document Cover closed.
(28) Scanning Unit Support
Holds the Scanning Unit (Cover) being opened.
(29) Card Slot
Insert a memory card.
(30) Access lamp
Lights or flashes to indicate the memory card status.
Note
For details on installing the Print Head and ink tanks, refer to the printed manual: Getting Started. |
Operation Panel
(1) ON button
Turns the power on or off. Before turning on the power, make sure that the Document Cover is closed.
Important
Disconnecting the power plug When disconnecting the power plug after turning off the power, be sure to confirm that all lamps on the Operation Panel are not lit. If the power plug is disconnected from the wall outlet while any lamp on the Operation Panel is lit or flashing, the machine may become unable to print properly since the Print Head is not protected. If the power plug is disconnected, the date/time settings as well as all documents stored in memory will be lost. Send an unsent fax or print a necessary document before the power plug is disconnected. |
Note
The machine cannot receive faxes when the power is turned off. The power cannot be turned off while the machine is sending or receiving a fax, or when there are unsent faxes in the machine's memory. |
(2) COPY button
Switches the machine to copy mode. Flashes when you turn on the machine.
(3) FAX button
Switches the machine to fax mode.
(4) SCAN button
Switches the machine to scan mode.
(5) MEMORY CARD button
Switches the machine to memory card mode.
(6) FAX Quality button
Selects the scan contrast and resolution of the fax you are sending.
(7) LCD (Liquid Crystal Display)
Displays messages, menu selections, and the operational status.
Note
The LCD will turn off if the machine is not operated for about 5 minutes. To restore the display, press any button except the ON button or perform the print operation. The display will be also restored when receiving faxes. |
(8) Menu button
Displays the menu screen.
(9) Settings button
Changes the available settings in each mode such as page size, media type, image correction, etc.
(10) Numeric buttons
Used to enter numerical values such as the number of copies, as well as fax/telephone numbers and characters.
(11) Redial/Pause button
Displays the list of numbers dialed with the Numeric buttons to redial the selected number.
Also, used to enter pause time between or after numbers when dialing or registering numbers for example International calls.
(12) Coded Dial button
The list of registered names appears in the Search TEL number screen, and use the button to display the coded speed dial codes in the list. You can specify the destination's number from the list of registered names or the list of coded speed dial codes.
In the list of registered names, enter the first letter of a pre-registered name to search a pre-registered fax/telephone number or group. You can also use the (Up) or (Down) button to select a desired destination.
In the list of coded speed dial codes, enter a two-digit code to select a desired destination.
(13) Black button
Starts to make black & white print, copy, scan, fax, etc.
(14) Stop button
Cancels operation when print, transmission, or scan job is in progress.
(15) Color button
Starts to make color print, copy, scan, fax, etc.
(16) Hook button
Connects or disconnects the telephone line.
(17) Tone button
In the fax mode, switches to tone dialing temporarily or used to dial with the Numeric buttons, and also changes the input mode when entering characters.
In the memory card mode, used to crop a part of photo (trimming).
(18) Two-Sided button
Specifies the settings for duplex copying.
(19) (Up) (Down) (Left) (Right) buttons
Scrolls through menu selections and increases/decreases setting values, such as the number of copies. You can use these buttons when (Up), (Down), (Right), and (Left) are displayed on the LCD. Also, the (Left) button cancels the entered character, and the (Right) button enters a space between characters when entering characters.
(20) OK button
Selects a menu or setting item.
Resolves an error when printing is in progress or resumes the machine's normal operation after removing jammed paper or to eject documents remaining in the ADF.
(21) Back button
Cancels operations and returns the LCD to the previous screen.
(22) Change Display button
Switches the image display in the memory card mode to the full-screen display or four-image display.
(23) One-Touch Speed Dial buttons
Used to dial pre-registered fax/telephone numbers or groups with a simple operation.
(24) In Use/Memory lamp
Flashes when sending or receiving faxes, and lights when there are documents saved in the machine's memory.
(25) Alarm lamp
Lights or flashes orange when an error, such as paper-out or ink-out, occurs.
Note
The machine makes the beep sound when pressing buttons on the Operation Panel. |