Volume Control
This model has multiple volume control modes and settings. See the table provided below to change the appropriate volume setting.
Volume Control
|
Description
|
Settings
|
CALLING VOLUME |
Set the volume of the ring sound. |
0 (off)/1/2/3 |
LINE MONITOR VOL |
Set the volume of the line monitor (sound during dialing). |
0 (off)/1/2/3 |
ALARM VOLUME |
Set the volume of the error alarm sound. |
0 (off)/1/2/3 |
KEYPAD VOLUME |
Set the volume of the keypad. |
0 (off)/1/2/3 |
HANDSET VOL |
Set the volume of the Handset. This setting can be changed during a call, with |
1/2 |
RX CALL LEVEL |
Set the ring tone. |
STANDARD/HIGH |
LINE MONITOR, ALARM, CALLING and KEYPAD VOLUME
- Press <Menu>.
- Press to select DATA REGSTRATION.
- Press <Start/Copy> twice. [DATE & TIME] will appear on the display.
- Use to select [VOLUME CONTROL].
- Press <Start/Copy>.
- Use to select from the following.
[CALLING VOLUME]
[LINE MONITOR VOL]
[ALARM VOLUME]
[KEYPAD VOLUME]
- Press <Start/Copy>.
- Use to select the settings from [0] to [3]. [0] is the same as off.
- Press <Start/Copy> to save the changes.
- Press <Stop> to return to standby mode (date and receive mode will appear).
Top of Page
HANDSET VOLUME
- Press <Menu>.
- Press to select DATA REGSTRATION.
- Press <Start/Copy> twice. [DATE & TIME] will appear on the display.
- Use to select [VOLUME CONTROL].
- Press <Start/Copy>.
- Use to select [HANDSET VOL]
- Press <Start/Copy>.
- Use to select 1(low) or 2(high)
- Press <Start/Copy> to save the changes.
- Press <Stop> to return to standby mode (date and receive mode will appear).
Top of Page
RX CALL LEVEL
- Press <Menu>.
- Press to select DATA REGSTRATION.
- Press <Start/Copy> twice. [DATE & TIME] will appear on the display.
- Use to select [RX CALL LEVEL].
- Press <Start/Copy>.
- Use to select [STANDARD] or [HIGH].
- Press <Start/Copy> to save the changes.
- Press <Stop> to return to standby mode (date and receive mode will appear).
Top of Page