Press the Stop button on the MultiPASS
Article ID: ART158252 |
| |
Date published: 06/09/2015 |
| |
Date last updated: 08/18/2015 |
Description
Press the Stop button on the MultiPASS
Solution
Checksum Error
A checksum error on the printer's EEPROM will display various error messages.
- With the printer powered on, unplug the power cord at the printer.
- Wat approximately, 10 seconds to reset the printer.
- While holding down the Stop (or Stop / Reset) button, reconnect the power cord to the printer.
- Wait until the printer begins to prime the ink and then release the button.