Copying Instructions MP800 / MP800R / MP950
Article ID: ART159345 |
| |
Date published: 06/09/2015 |
| |
Date last updated: 08/18/2015 |
Description
Instructions how to make copies without using the computer.
Solution
Using the Copy Function Directly From The Printer
Instructions how to make copies without using the computer.
- Confirm that the printer is powered on and press the <Open> button. (The paper output tray will open.)
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/MP800/MP800_OpenButton.gif)
- Load paper in the auto sheet feeder or the cassette in the portrait orientation.
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/MP950/MP950_LoadPaper.gif)
- Lift the document cover and set a document on the platen glass.
Memo:
- Regardless of the document size, set it in the landscape orientation.
- Place the copying face down on the platen glass.
- Align the document with the alignment mark (shown as the arrow) on the lower right corner of the platen glass.
Note: The machine cannot scan the area approximately 3 mm from the front and right edges of the platen glass.
![](/library/attachments/ServiceWareImages/LDImages/WSSS/05SJ00199_EN_01/05SJ00199_01.jpg)
< 1 > Alignment Mark
- Close the document cover gently.
- Confirm that the printer is in Copy mode. If the printer is not in Copy mode, press the <COPY> button to switch into Copy mode.
- Check the copy settings, following the procedures below carefully.
![](/library/attachments/ServiceWareImages/LDImages/WSSS/05SJ00157_EN_01/05SJ00157_02_EN.gif)
< 1 > Check the paper size and media type.
< 2 > Use the up / down cursor button to specify the number of copies.
< 3 > Use the right / left cursor button to adjust the intensity.
Note: Pressing the right cursor button increases the intensity. Pressing the left cursor button decreases the intensity.
- Press the <Color> button for color copying, or the <Black> button for black & white copying. (The printer starts copying.)
Note: To cancel copying, press the <Stop/Reset> button.