On a full charge (about 4 hours to completely charge), you can use the Battery Pack NB-CP2LH (sold separately) to print up to about 54 sheets* of postcard-size paper.
* According to Canon testing. May vary depending on printing conditions.
Attach the Battery Pack NB-CP2LH
Follow these steps to attach the battery pack to a compatible SELPHY printer:
- Remove the battery pack mounting cover. With the switch held in the direction of arrow (1), move the mounting cover in the direction of arrow (2) to remove.
- Remove the battery terminal cover.
- Attach the battery pack. Slide the terminal-end in the direction of the arrow (1) and insert the other end (2) until it clicks into place.
Battery Pack NB-CP2L (sold separately) can also be used. On a full charge, up to about 36 sheets of postcard-size paper can be printed. According to Canon testing. May vary depending on printing conditions.
Charge the NB-CP2LH Battery Pack
-
Once power is connected, charging starts and blinks on the screen.
-
When charging is finished in about four hours (at room temperature), will no longer be displayed.
-
SELPHY can be used even while is blinking by turning it on. However, charging stops. When the power is turned off, blinks and charging resumes.
-
For battery precautions, refer to the battery user manual.
-
When is displayed, place SELPHY in an environment at operating temperature, and charge once it has adjusted to the ambient temperature.
-
When is displayed in red, the battery has reached the end of its life. Please purchase a new battery.
-
When is displayed, press and hold any button other than the button for 3 seconds or more to clear . Also, if charging and the screen is off, press any button other than the button to display for approximately 10 seconds.