The menu item [IS Mode] is not displayed in the following cases:
ã»When EF or EF-S lens is attached;
ã»When EF-M lens with no Image Stabilizer function is attached.
Also, even in EF-M lenses with Image Stabilizer function, when set to the [ ] [ ] [ ] modes, [IS Mode] is not displayed.
NOTE
Lenses with built-in image stabilization are named with "IS". IS stands for Image Stabilizer.
EF-M Lens For non-IS EF-M lenses, the [IS Mode] menu option will not be displayed.
Configure image stabilization via the camera menu when using an EF-M lens with image stabilization.
At the time of purchase, camera's [IS Mode] is set to [Continuous].
1. Press the power button to turn the camera on.
2. Press the button to display the menu.
3. Press the / buttons or turn the dial to choose the [ 4 ] tab.
Press the / buttons to select [IS Settings], and then press the button.
4. Press the / buttons to choose [IS Mode], then press the button.
5. Press the / buttons to choose an option, and then press the button.
Continuous | Corrects camera movement or camera shake using built-in image stabilization performed by the lens. |
Off | Deactivates image stabilization. |
6. To return to the previous screen during configuration, press the button.
NOTE
If image stabilization cannot prevent camera shake, mount the camera on a tripod or take other measures to hold it still. Additionally, you should set [IS Mode] to [Off] when using a tripod or other means to secure the camera.
EF or EF-S Lenses [IS Mode] is not displayed for lenses other than EF-M lenses. Use the image stabilization switch on the lens instead.
The Image Stabilizer will operate when the lensâ [STABILIZER] (Image Stabilizer switch) is set to [ON], as shown in the image below.
Non-IS EF lenses do not include a [STABILIZER] (Image Stabilizer switch).
|