Part 1: Setting Up The Printer
To connect the machine to the computer via wireless LAN, select wireless LAN using the operation panel. You can search the wireless routers (or access points) available for connection and select one from the display of the machine. For the network key, enter a WEP key or PSK. Before selecting a wireless router, check and write down the required setup information, including the SSID and network key.
1. Tap <Menu> in the Home Screen.
2. Tap <Network Settings>.
- If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and tap <Apply>.
3. Tap <Select Wired/Wireless LAN>.
4. Tap <Wireless LAN>.
5. Tap <Wireless LAN Settings>.
- If the <Do you want to enable the wireless LAN?> message is displayed, tap <Yes>.
6. Read the message that is displayed, and tap <OK>.
7. Tap <SSID Settings>.
8. Tap <Select Access Point>.
- The machine starts searching for available wireless routers.
9. Select a wireless LAN router.
- Select the router whose SSID matches the one that you have written down.
10. Enter the network key that you have written down.
- Enter the network key using the numeric keys, and tap <Apply>.
- WEP
- WPA-PSK or WPA2-PSK
11. Tap <Yes>.
12. Check that the Wi-Fi indicator is blinking on the operation panel.
- The Wi-Fi indicator blinks when a wireless router is detected.
When the setup is completed, the screen below is displayed, and approximately 2 seconds later, the Wi-Fi indicator lights up.
Wait approximately 2 minutes until the IP address settings of the machine are completed.