Enable the access point mode following the procedure below.
-
Make sure that the machine is turned on.
-
Press and hold the Wi-Fi button and release it when ON lamp flashes.
-
Press the Black button, the Color button and the Wi-Fi button in this order.
Make sure the ON lamp changed from flashing to lit.
If the ON lamp has not changed from flashing to lit, go back to step 2.
The access point mode is enabled.
Note
-
To check the machine's MAC address and serial number, and the current access point mode settings, print out the network setting information.
-
WPA2-PSK (AES) is applied as the default security setting. However, you can change the security setting and the password using IJ Network Tool.
If you change the access point mode setting of the machine, also change the access point setting of your device.