➤
Home
Articles
FAQs
Ask a Question
Search
Models related to this article
imageFORMULA CR-L1 Check Transport
Home
Articles
Articles Detail
My scanner is not reading the MICR print correctly.
Article ID: ART172131
|
Date published: 10/05/2018
|
Date last updated: 10/05/2018
Description
If the magnetic heads are dirty, then MICR characters cannot be scanned correctly.
Solution
Periodically, clean the magnetic heads with a commercially available audio head cleaner.
Hood your finger around the open lever and open the maintenance cover.
Use a commercially available audio head cleaner to clean the magnetic head.
The magnetic head is located in the position shown in the diagram below.
Gently close the maintenance cover until it clicks into place.
Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments
Rate Article