Error Code |
Error Message |
Solution |
152 |
There is not enough memory. Exit other applications to increase available memory. |
- The memory required to start IJ Scan Utility Lite cannot be obtained; exit other applications.
|
153 |
The image you attempted to scan is in a size that cannot be opened in the specified application. Change the settings so that the image size is reduced. |
- Reduce the resolution or output size and scan again.
|
157 |
Cannot communicate with scanner for these reasons:
- Scanner is turned off.
- (If using Wired LAN connection) It is disconnected from Wired LAN.
- (If using wireless LAN connection) Signal strength is poor due to obstructions.
- Network connection is prohibited by security software.
- Different scanner on the network is selected.
Check the above and try scanning again.
If you still cannot communicate, restart the computer. |
- With network connection, check the connection status and reconnect as needed. If the same error message still appears, restart the computer.
|
201 |
A required file is missing or corrupted, or settings are incorrect.
Try the installation again. |
- Reinstall the scanner driver from our website.
- Reinstall IJ Scan Utility Lite from our website.
|
202 |
An internal error has occurred. Take the following measures.
- Check the scanner status.
- Restart the scanner.
- Restart the computer, then try again.
- Reinstall the scanner driver. |
|
231 |
Cannot complete the scan. The disk space is insufficient. |
- Delete unnecessary files on the hard disk and scan again.
|
232 |
Cannot complete the scan. The disk space is insufficient. |
- Cancel the write protection on the disk.
|
234 |
This scan function is not supported by the selected model. Select a different scan function. |
- Select a different scan function.
|
242 |
Cannot write file. |
- Check the access permission on the folder in Save in in the corresponding Settings dialog.
|
243 |
Cannot read file. |
- Check the access permission on the folder in Save in in the corresponding Settings dialog.
|
244 |
You do not have the required privileges to access the specified folder. |
- Grant access permission to the specified folder.
|
245 |
Text could not be detected. Make sure that the following conditions do not apply.
- The Document Language setting does not match the document language.
- There is no text in the document.
- Text that is not supported for detection is scanned. |
- Make sure the Document Language in the Settings (General Settings) dialog matches the document language.
- Make sure there is text in the document.
|
- |
Cannot communicate with scanner for these reasons:
- Scanner is turned off.
- (If using Wired LAN connection) It is disconnected from Wired LAN.
- (If using wireless LAN connection) Signal strength is poor due to obstructions.
- (If using USB connection) USB cable is disconnected.
- Other software or another user is using the scanner.
Please check and try again. |
- Make sure that your scanner or printer is turned on.
- With network connection, check the connection status and reconnect as needed.
- With USB connection, check the connection of the USB cable and reconnect as required.
- Close the other application.
|