If images are blurred or out of focus when shooting, check the following items.
IMPORTANT
- The instructions in this section apply to a camera with the [Shooting Mode] set to [Program AE] (P).
1. Holding the camera Hold the camera securely to reduce camera shake.
- Place the strap around your neck.
- When shooting, keep your arms close to your body and hold the camera securely to prevent it from moving. Do not rest your fingers on the [Flash].
2. When the camera shake warning icon appears In low-light conditions, the [Camera shake warning icon] [ ![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0035839.gif) ] blinks when you press the [Shutter button] halfway. Refer to the following points to prevent camera shake.
Set [IS Mode] to [Continuous].
![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0013173.gif) Press the power button.
![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0013174.gif) Press the [MENU] button and then choose the [ ![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0078114.gif) ] tab.
![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0013176.gif) Press the [ ![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0100112.gif) ], [ ![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0100113.gif) ] buttons, choose [IS Settings], and then press the [ ![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0099806.gif) ], [ ![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0099807.gif) ] buttons to set [IS Mode] to [Continuous].
Choose [ ![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0039836.gif) ] (On).
- Lift the flash, press the [
] button, and then press the [ ], [ ] buttons to choose [ ](On).
NOTE
The setting screen cannot be accessed by pressing the [ ![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0099807.gif) ] button when the flash is lowered. Lift the flash with your finger in advance.
Increase the ISO speed.
- Press the [
] button, then select [ ] from the menu and choose the desired [ISO Speed].
NOTE
To set the [ISO Speed], it is necessary to set the [Shooting Mode] to one of the following modes:
- [Program AE] (P), [Long Shutter] ( ![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0148737.gif) )
*[ ![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0148742.gif) ] cannot be set in [Long Shutter] mode.
Mount the camera on a tripod or take other measures to keep it still.
- You should set [IS Mode] to [Off] when using a tripod or other means to secure the camera.
3. When shots are out of focus Press the [Shutter button] halfway to focus on subjects before pressing it all the way down to shoot.
- Press the [Shutter button] halfway (press lightly to focus) before pressing all the way down (press fully to shoot).
Make sure subjects are within focusing range.
Focus Range | Maximum Wide Angle
| Maximum Telephoto
|
| 5 cm (2.0 in.) – infinity | 1.4 m (4.6 ft.) – infinity |
* | 0 – 50 cm (0 in. – 1.6 ft.) | - |
* | 3.0 m (9.8 ft.) – infinity | 3.0 m (9.8 ft.) – infinity |
* Cannot be selected for some shooting modes. |
Set [AF-assist Beam] to [On].
![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0013173.gif) Press the power button.
![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0013174.gif) Press the [MENU] button and then choose the [ ![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0078114.gif) ] tab.
![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0013176.gif) Press the [ ![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0100112.gif) ] , [ ![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0100113.gif) ] buttons to choose [AF-assist Beam], and then choose [On].
Confirm that unneeded functions such as macro are deactivated.
![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0013173.gif) Press the power button.
![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0013174.gif) Press the [ ![](/library/attachments/CanonUSA/TroubleshootingContents/Images/Global/G0099806.gif) ] button, and then choose a [Focus Range] suitable for your environment.
Try shooting with focus lock.
[Focus Lock]
As you continue to hold the [Shutter button] halfway down, recompose the shot as desired.
4. When no AF frames are displayed and the camera does not focus To have [AF frames] displayed and the camera focus correctly, try composing the shot with higher-contrast subject areas centered and then press the [Shutter button] halfway, or press the shutter button halfway repeatedly.
NOTE
For some shooting scenes and subjects, the camera might not focus correctly.
|