The video display has SDI and HDMI input terminals to connect to input devices.
CAUTION
Check that the power of the video display and input devices is switched off before connecting.
SDI input signals
Input signal
Input terminal
Quad Link
(Square Division)
V1710
6G/3G/HD-SDI V1711
12G/6G/3G/
HD-SDI
Top left, Mapping signal
Input A
Single input system
Top right, Mapping signal
Input B
Bottom left, Mapping signal
Input C
Bottom right, Mapping signal
Input D
Quad Link
(2 Sample Interleave)
3G-SDI
Link 1
Input A
Single input system
Link 2
Input B
Link 3
Input C
Link 4
Input D
Dual Link1
6G/3G-SDI
Link 1
Input A
Two input systems
Link 2
Input B
Link 1
Input C
Link 2
Input D
Single Link
V1710
6G/3G/HD/SD-SDI V1711
12G/6G/3G/HD/
SD-SDI
---
Input A/Input B/
Input C/Input D
Four input systems
1 The signals are automatically switched when [Image Division] is set to [Automatic].
Reference
V1710 The connection is tested using 4VS03A-5C BNC cables (multi) manufactured by Canare Electric Co. V1711 The connection is tested using D5.5UHDC03E BNC cables manufactured by Canare Electric Co.
When 3G-SDI RAW signal frequency exceeds 30.00P, it becomes a dual connection.
Each input terminal is compatible with through output. When signals are input from Input A, connect the cable to the SDI (OUT) terminal of Input A.
HDMI input signal
CAUTION
Use a HDMI cable with the High Speed logo that complies with the HDMI standard. When a non-compliant HDMI standard cable is used, the video display may not work normally, for example a video becomes choppy or nothing is displayed.