Playing Back on a TV Screen
-
Turn off all devices before starting the connections.
-
Connect the supplied MTC-100 Multi Cable to the camcorder's AV terminal and the audio terminals on the TV or VCR.
- Connect the white plug to the white audio terminal L (left) and the red plug to the red audio terminal R (right).
-
Connect the MTC-100 Multi Cable to the video terminal on the TV or VCR.
- If your TV or VCR has an S-VIDEO or (S1)-VIDEO input, connect the black plug to the S(S1)-VIDEO terminal and do not connect the yellow plug. Otherwise, connect the yellow plug to the yellow video terminal (VIDEO).
-
If connecting to a TV, set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE.
- We recommend powering the camcorder from a household outlet.
- Picture quality is better when connecting to a TV with an S (S1) terminal.
- TVs with S1 terminals or Video ID1 systems: Recordings made in Widescreen will automatically be played back in the appropriate (16:9) screen aspect ratio.
|
Recording to a VCR
You can copy your recordings by connecting the camcorder to a VCR or a digital video device. For a connection diagram showing how to connect the camcorder to a VCR see above.
-
Set the camcorder to play movies () and load a recorded disc.
-
Connected device: Load a blank cassette and set the device to record pause mode.
-
This camcorder: Locate the scene you wish to copy and pause playback shortly before the scene.
-
This camcorder: Start the movie playback.
-
Connected device: Begin recording when the scene you wish to copy appears. Stop recording when copying is complete.
-
This camcorder: Stop playback.
- We recommend powering the camcorder from a household power outlet.
- The quality of the edited tape will be lower than that of the original.
- By default, the on-screen displays will be embedded in the output video signal, but you can select to turn off the screen displays or select the data that will be displayed instead.
|