Digital zoom + Select Digital zoom +. The On-Screen Menu disappears and D. zoom + Press the OK button to expand the image size. Use the Point buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM + or the OK button on the remote control unit. Digital zoom – Select Digital zoom –. The On-Screen Menu disappears and D. zoom – Press the OK button to compress image size. The projected image can be also compressed by pressing the D.ZOOM – or the OK button on the remote control unit. To exit the Digital zoom +/– mode, press any button except the D.ZOOM +/– buttons, OK and Point buttons. To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see page 30) again, or adjust the screen size with the D.ZOOM +/– buttons. Keystone This function is used to adjust keystone distortion of the projected image. Use the Point buttons to choose the item you want to adjust Keystone To correct keystone distortion, press the OK button. Keystone appears on the screen. Use the Point buttons to correct keystone distortion Store To store or reset the keystone correction, press the Point button. Store ........... Keep the keystone correction even when the AC power cord is plugged out or turned off the projector. Reset ........... Release the keystone correction when the AC power cord is plugged out. Ceiling When this function is set to On, the picture will be top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen. Screen Aspect This function is used to project the image to a 4:3 or 16:9 projection screen. Default (16:10) .... 16:10 is the aspect of the LCD panel. The original Screen Menu is available. 16:9 ..... Set to a 16:9 projection screen. 4:3 ..... Set to a 4:3 projection screen. Reset To reset the adjusted data, select Reset and press the OK button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures |