The device uses a built-in battery. Please fully charge the device via the USB cable before using.
- Plug in the USB cable into the device and a chargeable USB adapter.
- The charging LED light will turn red to indicate charging.
- Once fully charged, the charging LED will turn green.
− Operating time may vary depending on the battery status, operational status
and environment conditions.
– When the battery level is lower than 20%, it will enter to "LOW BATT".
The device can still taken several photo and printing.
Battery Status LED indicator
There are 2 color (red and green) LED indicators built in the device to show the battery and recharging status.
Status |
LED Indicator |
Remark |
Charging |
RED |
|
Full |
GREEN |
|
Low Batt |
RED (ashing) |
Lower than 20%, LED will be flashing for
30 seconds |
Not charging |
OFF |
|
Note:
HANDLE THE USB CABLE WITH CARE WHILE CHARGING
• Do not place any heavy objects on top of the cable.
• Do not place the USB cable near heat.
• Do not scratch, damage, twist or pull hard on the cable.
• Do not plug or unplug the cable with wet hands.
• Avoid too high/too low temperature or humid condition.
• Please unplug the USB cable from power source after charging.
• Please use supplied USB cable for charging.