Sending Images to a Computer Using EOS Utility Ver.3.x (Wi-Fi Function) (EOS 6D Mark II)
Article ID: ART168041 | | | Date published: 07/10/2017 | | | Date last updated: 08/17/2017 |
Description
Sending Images to a Computer Using EOS Utility Ver.3.x (Wi-Fi Function) (EOS 6D Mark II)
Solution
Solution |
You can save images from the camera to a computer via Wi-Fi using EOS Utility (EOS software).
This page describes how to connect the camera and a computer directly via Wi-Fi.
Step 1. Prepare Necessary Items 1. Check your computer environment.
To check if your computer supports connection to a camera via Wi-Fi, refer to the "Related Information" section at the end of the page.
2. Make sure that EOS Utility is installed on the computer.
Step 2. Configure Basic Settings for the Camera Configure necessary settings before using the wireless LAN functions of the camera.
1. Set the camera's power switch to <ON>.
2. Press the <MENU> button to display the menu screen.
3. Press the < > button, then select the [ ] tab.
4. Select [Wireless communication settings] under the [ ] tab, then press < >.
5. Select [Wi-Fi settings].
6. Select [Wi-Fi].
7. Select [Enable].
8. When the screen below appears, press < >.
9. Enter the nickname. You can enter any characters between 1 to 8 characters in length.
When you finish entering characters, press the <MENU> button.
*For more information on using the keyboard, please refer to "Operation Reference: Virtual Keyboard Operation".
10. When the following screen appears, select [OK], then press < >.
Press the < MENU > button to return to the [Wireless communication settings] screen.
11. Select [Wi-Fi function].
12. The screen to select a device for connection is displayed.
This completes the basic settings of the camera.
Step 3. Connect the Camera and the Computer 1. [ ] Select [Remote control (EOS Utility)].
2. Select [Register a device for connection].
3. Check the SSID and password.
4. Select the SSID, then enter the password.
5. Select [OK] and press < >.
6. The following message is displayed.
"******" represents the last six digits of the MAC address of the camera to be connected.
7. Start EOS Utility.
8. In EOS Utility, click [Pairing over Wi-Fi/LAN].
If a firewall-related message is displayed, select [Yes].
9. Select the camera to connect to, then click [Connect].
10. When the camera detects the computer on which you clicked [Connect] in step 9, the screen below is displayed.
11. The [ Wi-Fi on] screen will appear.
Connecting the camera and the computer is now complete.
Step 4. Send Images to the Computer 1. After the main window of EOS Utility appears, click [Download Images to Computer].
2. When the following window appears, click either ( ) to [Start automatic download] or ( ) to [Select and download] images.
3. If you have selected [Select and download] images in step 2, the viewer window appears and the images in the memory card are displayed in a list.
In the displayed list of images, checkmark the images to download and click [Download] (here, 4 images are selected).
If you have selected [Start automatic download], proceed to step 5.
4. The [Download image] dialog box appears. To change the save destination, click [Destination Folder] and in the dialog box that appears, change the destination. Click [OK].
Displays the save destination on the computer
Specify the save destination
5. The images are downloaded to your computer.
6. When images have been downloaded, click [Quit] and close EOS Utility.
Downloading images is now complete.
Operation Reference: Virtual Keyboard Operation For details on keyboard operation when registering camera's nickname, refer to the following.
You can change the nickname later on the [Wireless communication settings] screen.
|
|||||||||||||||
Related Info | Computer Environment Required for Connecting the Camera via Wi-Fi (EOS Utility 3.x) | |||||||||||||||
ID: 8203590200_EN_1
|
SIMS Doc Id
8203590200