EOS 1v / 1v HS : How to load the film
Article ID: ART151412 |
| |
Date published: 05/22/2015 |
| |
Date last updated: 02/05/2016 |
Description
How to load the film
Solution
|
Open the camera back.
- Use your thumb to press the camera back lock release button and slide the camera back lever down as shown by the arrow to open the camera back.
- If this is difficult to do with one finger, use one finger to press the lock release button and another finger to slide down the lever
Insert the film cartridge at an angle shown in the figure.
- Set the main switch to ON
|
|
Pull the edge of the film leader to the orange mark on the camera
- Hold down the film cartridge while pulling out the film leader
- If the edge of the film leader goes beyond the orange mark, rewind some of the film back into the cartridge
Close the camera back
- After checking that the film leader edge is correctly aligned with the orange mark, close the camera back
- The film will advance to frame 1 automatically
- After the film ID is imprinted the cartridge icon and frame counter "1" will be displayed
|