Message
|
Cause
|
Action
|
BLACK INK
CHANGED? |
The machine is asking whether you replaced the black ink tank. |
If you replaced the black ink tank, press [<]. If you did not, press [>]. |
BLACK INK LOW |
The ink level in the black ink tank is low. |
Make sure you have a new black ink tank ready to replace the used one when ink runs out. If the machine stops printing when copying or photo printing, you can continue printing by pressing [Set]. However, note that ink may run out. If print quality deteriorates or the printout is blank, replace the ink
tank. |
CARTRIDGE
JAMMED |
The print head holder cannot move. This is normally due to a paper jam. |
Clear the paper jam or whatever is obstructing the print head holder and then press [Set]. Do not attempt to move the print head holder manually. |
CHECK PAPER
SIZE |
The size of the paper in the multi-purpose tray and that specified in the paper size setting are different. |
Load the correct paper size or change the paper size setting. Then press [Set]. |
CHECK PRINTER |
For some reason, the machine cannot operate. |
Turn OFF the machine, then ON. |
CLEAR PAPER JAM |
There is a paper jam. |
Clear the paper jam and reload paper in the multi-purpose tray. Press [Set]. |
COLOR INK
CHANGED? |
The machine is asking whether you replaced the color ink tank. |
If you replaced the color ink tank, press [<]. If you did not, press [>]. |
COLOR INK LOW |
The ink level in the color ink tank is low. |
Make sure you have a new color ink tank ready to replace the used one when ink runs out. If the machine stops printing when copying or photo printing, you can continue printing by pressing [Set]. However, note that ink may run out. If print quality deteriorates or the printout is blank, replace the ink
tank. |
COVER OPEN |
You opened the scan unit during an operation. |
Return the scan unit to its original position. |
DATA IN MEMORY
CANNOT TURN OFF |
You are unable to turn OFF the machine with [ON/OFF] when documents are saved in memory. |
The machine is performing an operation. Wait until the operation has finished, then turn OFF the machine. |
INK TANK
CHANGED? |
You returned the scan unit to its original position after replacing an ink tank or clearing a paper jam. |
If you replaced an ink tank, press [<]. If you did not, press [>]. |
INVALID KEY/
SETTING |
An invalid key was pressed or an invalid setting was selected. |
Check the key you want to press or the setting you want to enter. |
LOAD PAPER |
The multi-purpose tray is empty. |
Load paper in the multi-purpose tray. Make sure the stack is below the paper limit mark. Press [Set], or press [Black] or [Color]. |
MACHINE IN USE
CANNOT TURN OFF |
You are unable to turn OFF the machine with [ON/OFF] because the machine is performing an operation. |
The machine is performing an operation. Wait until the operation has finished, then turn OFF the machine. |
MEMORY FULL |
The machine's memory is full because you tried to copy too many pages at once or a very detailed document. |
Divide the document and copy each part separately. |
PUT IN
CARTRIDGE |
There is no print head installed in the machine. |
Install the print head. |
WAIT COOLING |
During printing, the print head may have become too hot. |
Allow the machine to cool down. The machine will resume printing
when it has cooled down. |
WASTE INK NEAR
FULL |
The waste ink tank (which holds the ink used for print head cleaning) is nearly full. |
The waste ink tank will soon need replacement |
WRONG CARTRIDGE |
The print head is not installed correctly. |
Install the print head. If the message remains on the LCD, the print head may be defective. |