This mode is effective when you want a wide depth of field to keep everything in focus near and far. The optimum point of focus and aperture to attain the required depth of field are set automatically along with the shutter speed
- To use this mode, the lens focus mode switch must be set to AF
|
Turn the Command Dial to <A-DEP> and make sure the focus mode switch on the lens is set to AF
Press the shutter button halfway to focus the subject
- The active focusing points, the shutter speed and the aperture are displayed in the viewfinder and on the LCD panel. The area between the nearest subject covered by a focusing point and the furthest subject covered by another focusing point will be in sharp focus.
Check the shutter speed and aperture and take the picture
|