Preparing to Print
You do the direct printing procedure entirely with your camera while you look at the LCD monitor.
|
1 Set the camera's power switch to <OFF>.
2 Set up the printer.
- For details, see the printer's instruction manual.
3 Connect the camera to the printer.
- Use the interface cable that came with the camera.
- When connecting the cable plug to the camera's <> terminal, the cable plug's <> icon must face the front side of the camera.
- To connect to the printer, refer to the printer's instruction manual.
4 Turn on the printer.
5 Set the camera's power switch to <ON>.
- Some printers may make a beeping sound.
6 Playback the image.
- Press the <> button.
- The image will appear, and the <> icon will appear on the upper left to indicate that the camera is connected to a printer.
- The <> button lamp will light in blue.
|
- RAW images are not compatible with direct printing.
- The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct.
- When connecting the camera to the printer, do not use any cable other than the interface cable provided.
- If there is a long beeping sound in step 5, it indicates a problem with the printer. To find out what's wrong, do the following:
1. Press the <> button to playback the image.
2. Press <>.
3. On the print setting screen, select [Print].
The error message will be displayed on the LCD monitor
- If you use the battery to power the camera, make sure it is fully charged. With a fully charged battery, printing up to about 6 hours is possible.
- Before disconnecting the cable, turn off the camera and printer first. Hold the plug (not the cord) to pull out the cable.
- For direct printing, using AC Adapter Kit ACK-E5 (sold separately) to power the camera is recommended.