In this mode, all you have to do is press the shutter button and let the camera do everything else.
Press the power button.
- The start-up sound will play and the startup image will display in the LCD monitor. - Pressing the power button again turns the power off. - To switch to the setting that mutes all sounds (except for the warning sound), press and hold the <DISP.> button while pressing the power button.
Set the Mode switch to (Camera). - To check to see if the camera is set to Auto (Default setting) press the <FUNC./SET> button and use the or button to select (Auto).
- Press the <FUNC./SET> button to complete the setting.
Aim the camera at the subject.
Focus and shoot. - Press the shutter button halfway to focus.
- When the camera focuses, the camera beeps twice and the indicator lights green. - When the camera focuses, it beeps twice and the indicator lights green (orange when the flash fires). In addition, a green AF frame appears in the LCD monitor on the portion of the image used to set the focus.
- If the subject is difficult to focus on, the lower indicator beside the LCD will blink yellow and the beep will play one time.
Press the shutter button fully to shoot.
- The shutter sound will play and the image will record. The indicator will blink green while the image is recorded to the memory card. - The picture appears for two seconds on the LCD monitor*. * With the Review function, you can change the length of time images show on the LCD monitor after shooting, or set it so they do not show at all.