Volume Control
This model has multiple volume control modes and settings. See the table provided below to change the appropriate volume setting.
See below for B95 Operation Panel
Volume Control |
Description |
Settings |
Ring (Calling) Volume |
Set the volume of the incoming ring volume. |
0 (off), 1, 2 or 3 |
INCOMING RING |
Set the fax to ring (in FaxTel, FaxOnly) |
ON or OFF |
LINE MONITOR VOL |
Set the volume of the line (Hook) monitor (sound during dialing). |
0 (off), 1, 2 or 3 |
ALARM VOLUME |
Set the volume of the error alarm sound. |
0 (off), 1, 2 or 3 |
KEYPAD VOLUME |
Set the volume of the error keypad. |
0 (off), 1, 2 or 3 |
RX CALL LEVEL |
Set the tone of the psuedo ring when the fax is in FaxTel Mode. |
STANDARD or HIGH |
Telephone Messages |
Set the volume of the telephone messages (incoming, memo, outgoing). |
N/A |
Handset Receiving |
Set the volume heard on the B95 handset. |
VOLUME HIGH or VOLUME LOW |
Ring (Calling) Volume
Press [<] or [>] to change the volume from 0 (off) to 3.
Top of document
INCOMING RING
- Press <Function>. [DATA REGISTRATION] will appear on the display.
- Press <Start/Copy>.
- Press [<] or [>] to select [RX SETTINGS].
- Press <Start/Copy>.
- Press [<] or [>] to select [INCOMING RING].
- Press <Start/Copy>.
- Press [<] or [>] to select either [ON] or [OFF].
- Press <Start/Copy> to save the changes.
- Press <Stop> to return to standby mode (date and receive mode will appear).
Top of document
LINE MONITOR, ALARM and KEYPAD VOLUME
- Press <Function>. [DATA REGISTRATION] will appear on the display.
- Press <Start/Copy> twice. [DATE & TIME] will appear on the display.
- Press [<] or [>] to select [VOLUME CONTROL].
- Press <Start/Copy>.
- Press [<] or [>] to select from the following.
[LINE MONITOR VOL]
[ALARM VOLUME]
[KEYPAD VOLUME]
- Press <Start/Copy>.
- Press [<] or [>] to select the settings from [0] to [3].
[0] is the same as off.
- Press <Start/Copy> to save the changes.
- Press <Stop> to return to standby mode (date and receive mode will appear).
Top of document
RX CALL LEVEL
- Press <Function>. [DATA REGISTRATION] will appear on the display.
- Press <Start/Copy> twice. [DATE & TIME] will appear on the display.
- Press [<] or [>] to select [RX CALL].
- Press <Start/Copy>.
- Press [<] or [>] to select from the following.
[STANDARD]
[HIGH]
- Press <Start/Copy> to save the changes.
- Press <Stop> to return to standby mode (date and receive mode will appear).
Top of document
Telephone Messages
- Press <Play>.
- While the message is playing, press [<] or [>] to change the volume as desired.
Top of document
Handset Receiving
- Raise the B95 handset.
- Press [<] or [>] to select [VOLUME HIGH] or [VOLUME LOW].
Top of document
FAXPHONE B95 Operator Panel
Click on either One-touch or TAM buttons for detailed information.
One-touch Buttons
Back
TAM Buttons
Back