Printed paper is ejected.Pull out it before printing.
F: Output Tray Extension
Open to support ejected paper.
G: Operation Panel
Use to change the settings of the printer or to operate it
H: Document Cover
Open to load an original on the platen.
I: Platen
Load an original here.
J: ADF (Auto Document Feeder)
Load a document here.The documents loaded in the document tray are scanned automatically one sheet at a time.
K: Document Feeder Cover
Open when clearing jammed documents.
L: Document Tray
Open to load a document in the ADF.You can load two or more sheets of document of the same size and thickness.Load the document with the side you want to scan facing up.
M: Document Output Slot
Documents scanned from the ADF are delivered here.
N: Document Guide
Adjust this guide to match the width of document in the ADF.
A: USB Port
Plug in the USB cable to connect the printer with a computer.
B: Power Cord Connector
Plug in the supplied power cord.
C: External Device Jack
Connect an external device such as telephone or answering device.
Indicates the amount of ink required when replacing ink in print head.
F: Lower Limit Line
Indicates the lower limit of the sufficient amount of ink to print.Refill the ink tank before the amount of ink is below this line.
G: Print Head Holder
The print head is pre-installed.
A: ON button
Turns the power on or off.Before turning on the power, make sure that the document cover is closed.
B: ON lamp
Lights after flashing when the power is turned on.
C: HOME button
Used to display the HOME screen.
D: LCD (Liquid Crystal Display)
Displays messages, menu items, and operating status.
E: OK button
Finalizes your selection of items.Also used to resolve errors.
F: Numeric buttons
Used to enter numerical values such as the number of copies, as well as fax/telephone numbers and characters.
G: Black button
Starts black & white copying, scanning, faxing, etc.
H: Color button
Starts color copying, scanning, faxing, etc.
I: Stop button
Cancels operation when print, copy, scan, or fax transmission/reception job is in progress.
J: Alarm lamp
Lights or flashes when an error occurs.
K: FAX Memory lamp
Lights when there are received or unsent documents stored in the printer's memory.
L: buttons
Used to select a menu or setting item.These buttons are also used for entering characters.
M: Back button
Returns to the previous screen.
N: Wireless connect button
When you hold down the button, the button lights.The printer is then put into the standby mode for easy connection in a PC and smartphone.
O: QR button
A QR code is displayed when you press the button while the QR button lights.You can then gain access to the Online Manual that
describes operative functions. Cost of connecting to Internet is to be born by the customer.Depending on your smartphone or tablet, you may not be able to scan a QR code.
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers: