Untitled Document
Loading Paper in the Multi-Purpose Tray
Load paper in the multi-purpose tray as follows. If an error message appeared on the display, after correcting the problem, press <STOP> to clear the error and continue printing.
1. Make sure the paper thickness lever is set to
(left).
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/mpass/thicksets.gif)
2. Raise the paper rest until it stops (1), then move the paper guide to the left to match the size of your paper (2).
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/mpass/C5500_PaperRest_Guide.gif)
3. Prepare a stack of paper by fanning the edge that will feed into the unit first, and then tapping the stack on a flat surface to even its edges.
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/mpass/FanPap.gif)
4. Insert the stack into the multi-purpose tray until it stops (1), so that the right edge of the stack is aligned with the right side of the multi-purpose tray. Slide the paper guide snugly against the left edge of the stack (2).
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/mpass/C5500_PaperGuides.gif)
The multi-purpose tray holds up to 100 sheets of 20 lb. (75 g/m2) plain paper.
Make sure the stack is below the paper limit mark ![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/mpass/PaperLimMark.gif)
The MultiPASS is now ready to print.