Message
|
Explanation
|
SET THE TIME ZONE, DATE AND TIME
|
You have not set the time zone, date and time. This message appears each time you turn the power on until you set the time zone, date and time. |
CHANGE THE BATTERY PACK
|
Battery pack is exhausted. Replace or charge the battery pack. |
THE TAPE IS SET FOR ERASURE PREVENTION
|
Cassette is protected. Replace the cassette or change the position of the protect switch. |
REMOVE THE CASSETTE
|
Camcorder stopped operating to protect the tape. Unload and reload the cassette. |
CHECK THE HDV/DV INPUT
|
DV cable is not connected, or the connected digital device is turned off. |
CONDENSATION HAS BEEN DETECTED
|
Condensation has been detected in the camcorder. |
TAPE END
|
Tape reached the end. Rewind the tape or replace the cassette. |
HEADS DIRTY, USE CLEANING CASSETTE
|
Video heads are dirty. Clean the video heads. |
ENTERING "POWER STANDBY"
|
Appears for 1 second when you press the <STANDBY> button. |
CHECK THE LENS
|
Lens is not correctly mounted. Turn the lens until it clicks. If the message does not disappear, unmount and remount the lens. |
NO CARD
|
Memory card not is inserted into the camcorder. |
NO IMAGES
|
No images are recorded on the memory card. |
CARD ERROR
|
A memory card error occurred. The camcorder cannot record or play back the image. The error may be temporary. If the message disappears after 4 seconds an "" flashes red, turn the camcorder off, remove the card and reinsert the card. If "" changes to green, you can continue recording/playback. |
CARD FULL
|
No remaining capacity on the memory card. Replace with another card or erase images. |
NAMING ERROR
|
The folder and file numbers have reached their maximum value. |
UNIDENTIFIABLE IMAGE
|
Image is not recorded with JPEG compression, or with a compression not compatible with the camcorder, or the image file is corrupted. |
THE CARD IS SET FOR ERASURE PREVENTION
|
SD memory card is set for erasure prevention. Replace the card or change the position of the protect switch. |
INCORRECT TAPE STANDARD PLAYBACK IS RESTRICTED
|
You attempted to play back a tape recorded in a standard different than the one to which is the camcorder is set. |
THE MEMORY CARD COVER IS OPEN
|
Close the memory card cover. |
HD INCOMPATIBLE LENS
|
You mounted a lens that does not support HDV recording. |
THIS LENS HAS NO STILL SHOOTING CAPABILITY
|
You mounted a lens that does not support still images recording. |
INCOMPATIBLE INPUT SIGNAL
|
You attempted to input a video signal incompatible with the camcorder (for example 720p). |
PLAYBACK STD LOCKED PLAYBACK IS RESTRICTED
|
When the playback standard is already set in the camcorder, you attempted to play back a tape in a video standard different from that set. |
PLAYBACK STD LOCKED INCOMPATIBLE VIDEO INPUT
|
When the playback standard is already set in the camcorder, you attempted to input a video signal in a standard different from that set. |
COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED
|
You attempted to play back a copyright protected tape. |
COPYRIGHT PROTECTED DUBBING RESTRICTED
|
You attempted to dub a copyright protected tape. May also appear when an anomalous signal is received during analog line-in recording, or during analog-digital conversion of a copyright protected tape. |