Charging, Recording and Playback Times
Below times are approximate and vary according to the charging, recording or playback conditions.
Battery Pack |
NB-2LH (Optional)
|
BP-2L13 (Supplied)
|
BP-2L14 (Optional)
|
Charging Time |
130 min.
|
200 min.
|
225 min.
|
Recording Time (HDV mode) |
Viewfinder |
70 min. Max.
|
40 min. Typical*
|
120 min. Max.
|
75 min. Typical*
|
150 min. Max.
|
85 min. Typical*
|
LCD |
Normal |
65 min. Max.
|
35 min. Typical*
|
115 min. Max.
|
70 min. Typical*
|
140 min. Max.
|
80 min. Typical*
|
Bright |
65 min. Max.
|
35 min. Typical*
|
110 min. Max.
|
65 min. Typical*
|
135 min. Max.
|
80 min. Typical*
|
Playback Time (HDV Mode) |
85 min.
|
145 min.
|
175 min.
|
|
RecordingTime (DV mode) |
Viewfinder |
80 min. Max.
|
45 min. Typical*
|
140 min. Max.
|
80 min. Typical*
|
165 min. Max.
|
95 min. Typical*
|
LCD |
Normal |
75 min. Max.
|
45 min. Typical*
|
135 min. Max.
|
75 min. Typical*
|
155 min. Max.
|
90 min. Typical*
|
Bright |
75 min. Max.
|
40 min. Typical*
|
125 min. Max.
|
75 min. Typical*
|
150 min. Max.
|
85 min. Typical*
|
Playback Time (DV mode) |
95 min.
|
165 min.
|
195 min.
|
* Approximate times for recording with repeated operations such as start/stop, zooming, power on/off. Actual time may be shorter.
- We recommend charging the battery pack in temperatures between 10 degrees C and 30 degrees C (50 F and 86 F). Outside the temperature range of 0 degrees C to 40 degrees C (32 F to 104 F), the CHARGE indicator flashes rapidly and charging stops.
- A lithium ion battery pack can be charged at any charge state. Unlike conventional battery packs, you do not need to completely use or discharge it before charging.
- We recommend that you prepare battery packs 2 to 3 times longer than you think you might need.
- To conserve battery power, turn off the camcorder instead of leaving it in record pause mode.
- Turn off the camcorder before connecting or disconnecting the power adapter.
- If the adapter is used close to a TV, it may cause picture interference. Move the adapter away from the TV or the antenna cable.
- Do not connect any products that are not expressly recommended to the camcorder's DC IN terminal or to the power adapter.
- You may hear some noise from the power adapter during use. This is not a malfunction.
- Do not disconnect and reconnect the power cord while charging a battery pack. Charging may stop. The battery pack may not be charged correctly even if the CHARGE indicator glows steady. The battery pack may also not be charged correctly when a power outage occurs during charging. Remove the battery pack and attach it back to the camcorder.
|
- When the power adapter or battery pack is defective, the CHARGE indicator flashes rapidly (at about 2 flashes/second) and charging stops.
- The CHARGE indicator informs you about the charge status.
0-50%: Flashes once every second More than 50%: Flashes twice every second 100%: Glows steadily
|