How to set Custom Functions (C.Fn) on the EOS M50 Mark II.
Article ID: ART178491 | | | Date published: 11/19/2020 | | | Date last updated: 11/25/2020 |
Description
Solution
Custom Functions (C.Fn)Setting Custom Functions
Note
Custom FunctionsShading indicates that the Custom Function does not apply to this still photo shooting or movie recording. (The settings have no effect.)
Custom Function Setting ItemsCustom Functions are divided into two groups by function: C.Fn I: Exposure and C.Fn II: Others. C.Fn I: ExposureC.Fn 1: ISO expansion Makes “H” (equivalent to ISO 25600) available as an ISO speed you can set. Note that expanded ISO speeds (H) are not available when [: Highlight tone priority] is set to [Enable] or [Enhanced].
C.Fn 2: Safety shift You can shoot with the shutter speed and aperture value automatically adjusted to enable standard exposure if standard exposure would not be available under your specified shutter speed or aperture value in or mode.
C.Fn II: OthersC.Fn 3: Custom Controls You can assign frequently used functions to camera buttons that are easy for you to use.
Note
Functions available for camera controls
C.Fn 4: Release shutter w/o lens You can specify whether shooting still photos or movies is possible without a lens attached to the camera.
C.Fn 5: Retract lens on power off You can set whether to retract gear-type STM lenses (such as EF40mm f/2.8 STM) automatically when the camera’s power switch is set to .
Caution
Note
|