Message List - Mk2600
Article ID: ART180227 | | | Date published: 08/13/2021 | | | Date last updated: 08/13/2021 |
Description
This article lists various messages that you may see on the screen of the Mk2600.
Solution
The following messages may be displayed on the screen of the Mk2600.
Message |
Description |
Action |
Cannot modify. |
An attempt was made to select an unavailable setting. |
Check the User's Guide and make the correct setting. |
In Vert/Hor char, Character Space setting not possible. |
An attempt was made to enter a value that is outside of the settable range. |
Check the User's Guide and make the correct setting. |
No data to paste. |
The paste operation was attempted while there was no page data to be pasted. |
Prepare to be pasted by cutting or copying a page. |
Not enough memory. |
An attempt was made to enter characters when there was insufficient free space in memory. |
Delete some input data to free up some space. |
Length exceeded. Input data exceeds set length. |
An attempt was made to enter a value that is outside of the settable range. |
Check the User's Guide and make the correct setting. |
Numbering already set for this page. |
An attempt was made to enter characters in excess of the number of characters that can be entered. |
Enter only the allowed number of characters. |
xxxxxx already exists. |
An attempt was made to specify a folder name that already exists. |
Specify a different folder name. |
Not enough memory. |
An attempt was made to save a file while there was insufficient free space remaining. |
Delete any unnecessary files to create free space. |
No files. |
An attempt was made to load or delete a file even though no files have been saved. |
Confirm the file save destination folder. Save the file once more.
|
No files in selected folder. |
An attempt was made to load or delete a file in a folder even though no files have been saved in that folder. |
|
Already 99 files in selected folder. |
An attempt was made to save more than 99 files in a single folder. |
Either delete any unnecessary files and then save the desired files in that folder, or else save the files in a different folder. |
Symbol can not be input with 1.3mm font. |
Symbols cannot be entered when the character size is set to 1.3 mm. |
Change the character size to a value other than 1.3 mm. |
Number of the characters over. |
An attempt was made to select Auto on the Segment Length selection display for the page in which a maximum number of characters were entered with Expansion selected on the Plate Printing Area selection display. |
Delete characters to reduce the number of characters to a changeable one, and then change the setting. |
Cannot input. |
The specified character size or segment length does not allow you to enter characters. |
Change the segment length or character size. |
Don't operate. 3 lines in the page. |
The page to be divided or combined contains data entered on three lines. |
Edit or delete the pages on which characters are entered on three lines. |
No character data. |
An attempt was made to print even though no character data exists. |
Enter character data before printing. |
No media. |
An attempt was made to print while no printing media has been loaded. |
Load the print media and then press [Enter] to begin printing. |
No Ribbon cassette. |
An attempt was made to print while no ribbon cassette was installed. |
Install a ribbon cassette. |
End of media. |
The end of the printing media was reached while printing was in progress. |
Take out the printing media from the printer, and replace it with new printing media. |
Replace print media. |
The printing media was removed after the End of media message was displayed. |
Insert the new printing media and then press [Enter] to resume printing. |
End of ribbon |
The end of the ribbon cassette was reached while printing was in progress. |
Install a new ribbon cassette, then press [Enter] to resume printing. |
Start of media not detect. |
An operation was attempted while the printing media was not inserted properly. |
Take out the printing media, reinstall it correctly, then press [Enter]. |
Cannot initialize print head position. |
It is impossible to initialize the print head position for some reason. |
Press [Enter]. If the same message appears again, contact your dealer. |
Cannot move print head to print position. |
It is impossible to move the print head to the printing position for some reason. |
Press [Enter]. If the same message appears again, contact your dealer. |
Cannot initialize cut position. |
It is impossible to initialize the cutter position for some reason. |
Press [Enter]. If the same message appears again, contact your dealer. |
Data check |
An error was found in the data for some reason, so all of the data was initialized. |
Set up the printer functions again. Check the saved data, then enter / save data again. |
Close cover and press any key. |
An operation was attempted while the cover was open. |
Close the cover and press any key. |
Power turned off when saving file. |
The power was turned off while a file was being saved. Any bad data will be deleted. |
Check the saved files. Enter / save again the data being entered or the file not saved.
|
Power turned off when loading file. Resetting input data. |
The power was turned off while a file was being loaded. The entered data will be deleted. |
|
Power turned off when deleting file. Checking saved data. |
The power was turned off while a file was being deleted. |
Check the saved files. Delete the files that have not yet been deleted. |
Media JAM |
Tube or label tape is jammed. |
|
Printing... |
Remaining ribbon is low when printing. (approximately 10m remaining) |
Have a new ribbon cassette ready. |
No ribbon information. |
The printer could not properly communicate with the ribbon cassette. |
Follow the instructions on the screen. |
If PlatePrintingArea is Expansion, the media become only the Plate |
Expansion has been selected on the Plate Printing Area selection display. |
Only plates can be used as printing media. If you wish to print characters on another media type, select Auto on the Seg Length selection display. |
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
____________________________________________________________________________________________