Recording Movies on a Memory Card Optura S1
You can record still images with the camcorder, from a tape in the camcorder or from devices connected via the DV terminal or AV terminal. You can also record a still image on the memory card while you record a movie on the tape.
Contents:
Using the Camcorder to Record Movies on the Memory Card
Recording from a Tape in the Camcorder
Recording from Other Video Devices
Using the Camcorder to Record Movies on the Memory Card
- Do not turn off the camcorder, change the position of the TAPE/CARD switch, disconnect the power source, open the memory card cover or remove the memory card while the card access indicator is flashing. Doing so could result in data damage.
- Do not load/unload a cassette during recording.
|
- Sound for movies recorded on the memory card will be monaural.
- We recommend using a miniSD Card with a transfer rate of more than 2 MB/sec., right after you have formatted it with this camcorder. With memory cards not formatted with this camcorder, or when recording/erasing has been repeatedly performed, the writing speed may be lower and recording may stop.
- When powered by a battery pack, the camcorder shuts off after 5 minutes when the camcorder is left without any operation to save power. Approximately 30 seconds before the camcorder shuts off, " AUTO POWER OFF" appears in the center of the screen. If the camcorder shuts off, turn the POWER switch to OFF and back on again.
|
Recording from a Tape in the Camcorder
- Set the camcorder to mode.
- Selecting the movie size:
- Press the <FUNC.> button. Select the movie size symbol followed by a setting option and press the <FUNC.> menu.
- Press the button to start the tape playback.
- Press the <start/stop> button when the scene you wish to record appears.
- Pressing the <start/stop> button again stops recording.
- The data code of the movie will reflect the date and time it has been recorded on the memory card.
- An image recorded from an image in widescreen mode will be vertically compressed.
|
Recording from Other Video Devices
You can record video from devices connected via the S-video terminal or AV terminal (analog line-in function), or via the DV terminal as a movie on a memory card.
- Set the camcorder to mode and load a blank cassette.
- Make sure that the tape is stopped.
- Press the <MENU> button and select [VCR SETUP]. Select [AVDV], set it to [ON] and press the <MENU> button.
- Selecting the movie size:
Press the <FUNC.> button. Select the movie size symbol followed by a setting option and press the <FUNC.> menu.
- Connected device: Load a recorded cassette and play back the tape.
- Press the <start/stop> button when the scene you wish to record appears.
- Pressing the start/stop button again stops recording.