Procedure for connecting the camera to a TV set PowerShot A610, A620, A700, and A710 IS
Article ID: ART155456 |
| |
Date published: 06/09/2015 |
| |
Date last updated: 08/17/2015 |
Description
Procedure for connecting the camera to a TV set PowerShot A610, A620, A700, and A710 IS
Solution
Viewing Images on a TV Set - A610 & A620 & A700
You can use a video-compatible television as a monitor to shoot or play back images when it is connected to the camera with the supplied AV Cable.
1. Turn off the Camera and the TV. |
|
2. Connect the AV cable to the camera' s A/V OUT terminal.
- Open the terminal cover by slipping a fingernail under the left edge and plug the AV cable in all the way.
|
|
3. Plug the other ends of the AV cable to the VIDEO IN and AUDIO IN jacks on the TV. |
|
4. Turn on the TV and switch it to Video mode.
|
|
5. Turn on the camera. |
|
- The image will appear on the TV. Shoot or replay images as usual.
- If the images are not appearing on the TV when shooting, press the <DISP.> button.
- No image will appear on the LCD monitor when the camera is connected to a TV monitor.
- The video output signal can be switched (NTSC or PAL) to accommodate different regional standards. The default setting will vary between regions:
- NTSC: Japan, U.S.A., Canada, Taiwan, etc.
- PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
- If an incorrect video system is set, the output image will not display properly. Please refer to the TV's manual for details.
- If the TV is a stereo model, you can plug the audio plug into either the left or right Audio In jack. Please refer to the TV's manual for details.
- A TV set cannot be used in mode.
|