The following messages may appear on the LCD monitor.
| Busy... |
Image is being recorded to, or read from the memory card. Resetting settings to default. |
| No Memory card |
You attempted to shoot or replay images without a memory card installed. |
| Cannot record! |
You attempted to shoot an image without a memory card installed. |
| Memory card error! |
The memory card has experienced an anomaly. |
| Memory card full |
The memory card is too full to save more images or print settings. |
| Naming error! |
The file could not be created because there is a file with the same name as the directory that the camera is attempting to create, or the highest possible file number has already been reached. In the Rec. menu, please set [File No.] Reset to [On]. After you save all the images you wish to retain onto a computer, format the memory card. Please note that formatting will erase all the existing images and other data. |
| Change the battery pack |
Battery charge is insufficient to operate the camera. |
| No image |
No images recorded on the memory card. |
| Image too large |
You attempted to replay an image larger than 4992 x 3328 pixels. |
| Incompatible JPEG format |
You attempted to replay an incompatible JPEG file. |
| Corrupted data |
You attempted to replay an image with corrupted data. |
| RAW |
You attempted to replay an image recorded in a RAW format. |
| Unidentified Image |
You attempted to play back an image with corrupted data, an image with a recording type specific to another manufacturer's camera, or an image that has been downloaded to a computer and altered. |
| Cannot magnify! |
You attempted to magnify an image recorded in a different camera or data type, an image edited with a computer, or a movie. |
| Cannot rotate |
You attempted to rotate an image recorded in a different camera or data type, an image edited with a computer. |
| Incompatible WAVE format |
A sound memo cannot be added to this image since the data type of the existing sound memo is incorrect. |
| Cannot register this image! |
You attempted to register an image recorded in a different camera or a movie as a start-up image. |
| Cannot modify image |
You attempted to apply a My Colors effect to a movie or an image recorded in a different camera. |
| Cannot assign to category |
You attempted to categorize an image recorded in a different camera. |
| Cannot transfer |
When transferring images to your computer using the Direct Transfer menu, you attempted to select an image with corrupted data or an image taken with another camera. You may have also attempted to select a movie when [Wallpaper] was selected in the Direct Transfer menu. |
| Protected! |
You attempted to erase a protected image. |
| Too many marks |
Too many images have been marked for printing or for inclusion in a slide show. Cannot process any more. |
| Cannot complete! |
Could not save the print, transfer, or slide shot settings. |
| Unselectable image |
You attempted to set the print settings for an non-JPEG file. |
| Communication error. |
The computer was unable to download the image due to the large amount of images (approx. 1000) stored on the memory card. |
| Lens error, restart camera. |
An error was detected while the lens was in motion, and the power has been automatically turned off. This error can occur if you hold the lens while it is in motion or you operate it in a location with excessive dust or sand in the air. Try turning the power back on, and resume shooting or playback. If this message continues to display, contact your Canon Customer Support Help Desk as there may be a problem with the lens. |
| Exx |
(xx: number) Camera malfunction. Turn the power off and then back on, then shoot and replay. A problem exists if the error code reappears. Note the number and contact our Canon Customer Support Help Desk. If an error code displays directly after taking a picture, the shot may not have been recorded. Check image in replay mode. |
